Pitney Bowes DM300c Operator's Manual page 22

1 • Introduction
Important Safety Notes (cont'd)
• To reduce the risk of fire or electrical shock, DO NOT attempt
to re move covers or disassemble the control panel or its base.
The cab i net encloses hazardous parts. If you should drop or
otherwise dam age the unit, call Pitney Bowes.
• To obtain Material Safety Data Sheets (MSDS) for OSHA
requirements, please go to www.pb.com/msds. When
prompted, enter the product name, manufacturer, the Pitney
Bowes MSDS Number, or reorder number of the item you are
interested in.
• Keep fingers, long hair, jewelry and loose clothing away from
moving parts at all times.
• Avoid touching moving parts or materials while the ma chine is in
use. Before clear ing a stall (jam), be sure ma chine mechanisms
come to a complete stop.
• To prevent overheating, do not cover the machine.
• When removing stalled material, avoid using too much force
to pro tect against minor personal injury and dam age to the
equipment.
• Use the equipment only for its intended purpose.
• Always follow the specific occupational safety and health
standards prescribed for your workplace.
CAUTION: In case of an ink spill, leaking ink or
excessive ink accumulation, im me di ate ly dis con nect
the power cord from the wall plug and contact Pitney
Bowes. See the page v for contact information.
CAUTION: Do not move the DM475 by yourself. The
machine is made to separate into two sections, and by
moving it without proper disassembly, you may:
Contact Pitney Bowes to arrange a Service visit for
moving the machine (additional charges may apply).
See page v for contact information.
1-8
• cause serious injury to yourself
• cause serious damage to the machine
• cause the WOW module to go off of calibration
• void any service warranties
SV62261 Rev. C