Display Difficult to Read
The display contrast may need adjustment.
1. Press Menu.
2. Select "Setup".
3. Select "Display Contrast".
4. Select "Increase Contrast" or "Decrease Contrast" to change the
contrast level as necessary. The default is 6 lines (shown below).
Display Contrast
- l l l l l l
◄ Increase Contrast
◄ Decrease Contrast
◄ Accept
5. Select "Accept" to return to Setup menu.
Printing Problems
Symptom
Machine won't
print
Meter Stamp is
incomplete or
streaked; poor
print quality
SV62261 Rev. C
Cause
Machine is in seal-
only mode
Ink cartridge
needs replacing
Print nozzles
clogged
13 • Troubleshooting
+
Solution
This mode disables printing. Press
to return to Home screen
Home
and resume printing.
Replace ink cartridge. See "Replac-
ing the Ink Cartridge" in Chapter 12,
Maintenance.
Perform a print purge in an effort to
fix the printing problem See "Clean-
ing the Printer Nozzle" in Chapter
12, Maintenance.
NOTE: If printer maintenance
i
fails to correct the problem, call
Pitney Bowes (see page v).
13-3