Status Restored After Reset Or Power Down; Caller Id Logging; New Default - All Keysets In Caller Id Logging; Group 1 - NEC DS1000 Release Notes

Status Restored After Reset Or Power Down

Caller ID Logging

New Default - All Keysets In Caller ID Logging Group 1

Conference

Multiple Parties Cannot Place Conference On Hold

Directed Call Pickup

Pickup Of Additional Call Types

Do Not Disturb

Soft Keys Reordered

DS1000 Release Notes
3. Dial Y ( 9 ) to cancel forwarding.
OR
Dial N ( 6 ) to exit this procedure without canceling.
An extension's Call Forwarding will be reinstated after a power down or system reset. For example,
an extension with calls forwarded immediately to Voice Mail will still be forwarded to Voice Mail
after the system resets or is powered down and then powered back up.
To simplify Caller ID operation in DS1000, all keyset extensions by default are now in Caller ID
Logging Group 1. Since all keysets share a common group log, deleting a record at one keyset will
automatically update the log for all others. Following is the updated default programming for exten-
sions 300-315:
G
1807-Caller ID Log Type = 2 (group logging)
G
1807-Caller ID Logging Group = 1 (group 1)
If an extension user places a Conference on Hold, no other participants can place the Conference on
Hold, split it, or terminate it.
Directed Call Pickup will now pick up any type of call ringing the destination extension. In prior
software versions, Directed Call Pickup would not intercept:
G
Ringing Call Coverage key calls.
G
Ringing Group Call Pickup key calls.
G
Calls ringing the operator's Call Queue key.
The soft keys for Do Not Disturb are reordered so that they match the order of their numeric equiv-
alents (0=Off, 1=External, 2=Intercom, 3=All).
22-Button and 34-Button Display Telephone Operation
DS1000 02.10.12 Release Notes
Enhanced Features in 02.10.12
53 N 02.10.12