Module Components - Maytag 56326 Service Manual

CAUTION
NEVER ROTATE THE BLADE OR THE
DRIVE GEAR...IT WILL RUIN THE MAIN
AS SEMBLY.
Th ere are sever al sw it ches which will j am
if m anually t urned counter clockwis e and
th e gear s will be destr oyed if t urned
clockwise.) lf you need to advance the ice
ma ker int o t he cycle, use a jumper to
br idge H to T and unless the motor is
d e fect ive, it will run. ( The shut- off arm
m u s t b e i n t h e " O n " p o s i t i o n . )
NOTE: There are several slotted shafts on
th e m otor assembly board. Do not under
a n y circumst ances inser t a scr ew dri ver
and attempt to turn these shafts. The slots
a r e t o permit assem bly only.
NO TE: Ther e are no r epairable or
r ep laceable component s in the module.
Un less you ar e r eplacing t he modul e,
th er e should be no need t o r em ove it w hen
d i a g n o s i n g o r r e p a i r i n g t h e i c e m a k e r .
MODULE COMPONENTS
Shut-off arm linkage
Cam
Follower
Ground (Slightly longer
than other 3
terminals so that
ground makes first
and breaks last
when disconnected
or plugged in.
6-12