nStor Corporation Ultra S2S User Manual page 96

Administering the Array
NOTE:
5
NOTE:
6
7
86
Manual Configuration
If you would like to have a standby drive (Hot Spare), manually assign all
but one drive and the software will automatically allocate the unassigned
drive as the Hot Spare.
Press <Esc> to stop selecting drives and proceed with creating the pack.
The software displays the pack in the Disk Packs window on the lower right
side of the screen. Each pack listed displays the number of drives included,
and the total number of megabytes.
If you select more than eight (8) drives, the system will automatically
move the cursor out of the selection window and creates the pack.
If required, define additional packs, repeating steps 2 through 9.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Disk Packs
A: 5dv 43385 MB
System Drives
# Size (MB) Raid
0 34708 5
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Press <Esc> to return to the Pack Definition menu.
Cache Pack State
Thru A... Onln
Version 7.11
Firmware: t6, v3.33-00
System Drive Definition
Create System Drive
Change Write Policy
LUN Mapping
RAID Level
RAID 0 43385 MB
RAID 1 21692 MB
RAID 3 34708 MB
RAID 5 34708 MB
RAID 6 21692 MB
RAID 7 43385 MB