Table of Contents
Advertisement
To change the LUN mapping,
4
<Enter>.
5
When you have completed your changes, press <Esc> to exit.
A warning will appear if a system drive has no access path (no affinity).
Saving the Configuration
When you leave the New configuration menu, the system will prompt you to save
the configuration.
1
Select YES to save, or NO to undo all your changes.
2
Next you will be asked if you want to reset the controllers. Select YES.
After reset, you will return to the Configuration menu.
This completes the New configuration, proceed with "Initializing the System
Drives" on page 94.
use the arrow keys to make your selection and press
Administering the Array
Manual Configuration
93
Advertisement
Table of Contents
