Table of Contents
Advertisement
Configuration
8
9
72
Configuring the Array
MESSAGE:
OPTIONS:
3
1 Get Configuration
2 Show Configuration
3 Create Array
ENTER PARAMETER:
INSTRUCTIONS:
Enter Channel Number
INFORMATION:
Select the drives (up to 8) for the Array, <Esc> to end selection
Selected Drives (CHN:TGT) : 0:0, 0:1, 0:2, 1:0
Press <Esc> when finished. The system will prompt you for the RAID level.
Enter the value for the RAID level (i.e., 0, 1, 3, 5, 6, etc.).
MESSAGE:
OPTIONS:
3
1 Get Configuration
2 Show Configuration
3 Create Array
ENTER PARAMETER:
INSTRUCTIONS:
Enter RAID Level for the System Drive
INFORMATION:
Possible RAID Levels = RAID0, RAID3, RAID5, RAID6
Selected Drives (CHN:TGT) : 0:0, 0:1, 0:2, 1:0, 1:1
You will be prompted for the size of the System Drive. It will automatically
display the maximum size as a default. Enter the desired size and press
<Enter>.
5
Advertisement
Table of Contents
