Vt100 Menu Functions - nStor Corporation Ultra S2S User Manual

VT100 Menu Functions

The following descriptions are given for each of the functions provided by the
VT100 menu options.
Configuration Menu Options
Function
Get Configuration
Show Configuration
Delete Last Array
Create Standby
Save Configuration
Start Initialization
Change Write Policy
Change SD Affinities
Show SD Affinities
Show LUN to SD
Mapping
Administration Menu Options
Function
Rebuild/Check Rate
Start Rebuild
Start Parity Check
Description
This function loads the current saved configuration data into
the controller's temporary work space.
This menu selection allows the user to review the current
configuration data.
This menu selection allows the user to remove the last drive
group created from the configuration.
This menu selection allows the user to specify a drive that
will serve as a "hot spare" or standby drive.
This selection will save the current configuration data.
This selection will start the initialization of drives in the
array.
This selection allows you change the cache write policies
from write through to write back.
This selection provides the ability to assign System Drive
(SD) affinity.
This selection displays the current System Drive affinity.
This menu selection displays the Logical Unit Number
(LUN) to System Drive mappings.
Description
This menu selection allows the user to specify the controller
rebuild and parity check priority rate.
This menu selection allows the user to start a rebuild
process.
This menu selection allows the user to start a parity check
on a logical drive.
Configuration
77
VT100 Menu Functions