Table of Contents
Advertisement
Configuration
Toolkit Menu Options
78
VT100 Menu Functions
Function
LUN Statistics
SDRV Statistics
Enclosure Status
Relinquish Partner
Kill Partner
Reset Controller
Add Capacity
Function
Show Drives
Drive Information
Change Drive State
Format Drive
Controller Params
Controller Diag
AEMI Scan
Description
This menu selection provides statistical data about the
logical drives.
This menu selection provides information about the existing
System Drives.
This selection provides information about the enclosure's
components.
This menu selection brings a controller in a duplex
environment out of reset mode and places it back in service.
This menu selection, in a duplex environment, places the
controller into reset mode. Surviving controller assumes the
duties of the partner controller.
This selection, simplex or duplex, causes the controller(s) to
go through a cold start.
This selection provides the dynamic RAID set expansion
feature allowing the addition of drives to a given RAID set
while the controller is on-line with the host.
This function displays the operational state of drives in the
array (online=ONL, dead=DED, standby=SBY,
rebuild=RDY, or not used =.), and the logical unit number
associated with each drive.
This menu selection allows the user to get specific
information about an individual drive.
This menu selection allows the user to set a drive
operational state to online, dead, or standby.
This menu selection allows the user to perform a low-level
format on drives not assigned to an array.
This selection allows you to view current controller(s)
parameters.
This menu selection performs a controller diagnostics
routine.
Not sure what this does.
Description
Advertisement
Table of Contents
