Table of Contents
Advertisement
Select Start Initialize, press the <1>key and press <Enter>.
2
Select the System Drive to be initialized. Enter the System drive ID and press
3
<Enter>.
4
Verify that your selection is correct and press "Y" to start the initialization.
Press "N" to cancel the selection.
MESSAGE:
INIT SDRV COMPLETE
OPTIONS:
1 Start Initialize
2 Change Write Policy
3 Change System Drive Affinity
ENTER PARAMETER:
INSTRUCTIONS:
Enter option, 'N' for more options, <Esc> for previous menu
INFORMATION:
The following message will be displayed: "INIT STARTED."
5
6
Press any key to return to the previous menu.
7
Press <Esc> twice to return to the Main menu. This screen displays the
status of the initialization. When the process is complete, the system displays
the message: "INIT SDRV COMPLETE."
The array is now ready.
This completes the configuration and initialization using the VT100 terminal
mode.
Configuration
75
Initializing the Array
Advertisement
Table of Contents
