Initializing The System Drives - nStor Corporation Ultra S2S User Manual

Administering the Array

Initializing the System Drives

After you have configured the System Drives, you must initialize them.
CAUTION:
To initialize one, several, or all System Drives, proceed with the following:
1
2
3
94
Initializing the System Drives
Failure to initialize a System Drive may result in unpredictable drive
behavior, such as the inability to boot or load the operating system,
or failure of a consistency check. Any data placed on an uninitialized
System Drive is at risk.
Select Administration from the Main menu.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
Choose this option to initialize one or more System drives simultaneously.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Select Initialize System Drives from the Administration menu.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
Choose this opton to select System Drives for initialization.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Choose Select System Drives from the Initialize System Drives menu. The
software will display a precautionary message, press any key to continue.
Administration Menu
Rebuild Redundancy
Initialize System Drives
Check Consistency
Relinquish Partner
Kill Partner
Reset Controllers
Initialize System Drives
Select System Drives
Start Initialize
Version 7.11
Firmware: t6, v3.33-00
Version 7.11
Firmware: t6, v3.33-00