nStor Corporation Ultra S2S User Manual page 77

This selection will provide access to the drive and controller utilities.
3 Press <N> to view more options. Select Controller Parameters, press the
<2> key and press <Enter>.
MESSAGE:
OPTIONS:
1 Show Drives
2 Drive Information
3 Change Drive State
INSTRUCTIONS:
INFORMATION:
From this point you will need to step through all the settings to configure
your controller. Use the <Space Bare> to toggle between choices and the
<Enter> key to move to the next selection.
MESSAGE:
OPTIONS:
1 Configuration
2 Administration
3 Tool Kit
INSTRUCTIONS:
INFORMATION:
MESSAGE:
OPTIONS:
1 Format Drives
2 Controller Parameters
3 Controller Diagnostics
INSTRUCTIONS:
INFORMATION:
Configuration
Configuring the Controllers Parameters
67