Table of Contents
Advertisement
Configuration
Claimed without Drive Letter (Physical Addressing)
An existing configuration on the controller is required for this addressing method:
1
2
3
Configuring the Array
NOTE:
1
2
40
Configuring the Array
Make sure the CR8e with the Ultra S2S RAID Controller is powered on.
Turn on the computer and boot Windows NT. Windows NT will claim
ownership of the controller.
If you do not assigned drive letters, Raidfx will use physical addressing to
locate all the controllers that are not accessible by either the HBA addressing
or Logical Addressing.
Start AdminiStor PC Utilities – Raidfx. For example, from the Run option in
the Start menu, type
c:\path\raidfx
If more than one CR8e subsystem(s) is connected to the host adapter you
will be prompted to select the CR8e on the host adapter at the specific ID
to configure.
Select the ID of the subsystem you wish to configure and press <Enter>.
Normally, the utility will locate the controller and scan the devices attached
to it. A screen will appear indicating the inquiry, followed by the AdminiStor
PC Utilities screen.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
Choose this option to access the configuration menu. Configurations
may be examined, changed, backed up, etc.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Choose Configuration from the Main menu and press <Enter>.
and press <Enter>.
Main Menu
Configuration
Administration
Tools
Select Controller
Version 7.11
Firmware: t6, v3.33-00
Advertisement
Table of Contents
