Option 1 - Automatic Configuration - nStor Corporation Ultra S2S User Manual

Configuration
Option 1 – Automatic Configuration
1
CAUTION:
2
50
Option 1 – Automatic Configuration
This option will automatically configure a RAID 5 system drive containing
from three to eight disk drives. All drives must be the same size. The stripe
six is taken from the current Stripe Size setting.
Use the arrow keys to highlight Configuration from the Main menu and press
<Enter>.
Running Automatic Configuration will clear any pre-existing
configuration, along with all programs and data on the disk array. If
you wish to change an existing configuration, use the View/Update
option.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
If more than 3 Physical drives are present, choose this option to create one
RAID 5 System Drive automatically.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Select Automatic and press <Enter>. If no previous configuration exists,
you will be prompted. Select YES to continue.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Configuration Menu
Automatic
New
View/Update
Increase Capacity
Advanced Functions
Backup
Restore
Print
Clear
Automatic Configuration
No Configuration
Version 7.11
Firmware: t6, v3.33-00
Version 7.11
Firmware: t6, v3.33-00
exists, ok?
NO
YES