Installing The Administor Pc Utilities; Starting Administor Pc Utilities - nStor Corporation Ultra S2S User Manual

Configuration

Installing the AdminiStor PC Utilities

NOTE:
1
2
3
4
5

Starting AdminiStor PC Utilities

Using DOS ASPI
NOTE:
1
2
NOTE:
Using Windows NT Pass-Through
There are three addressing methods available. AdminiStor PC Utilities – Raidfx
uses all three methods simultaneously.
38
Installing the AdminiStor PC Utilities
Before installing AdminiStor PC Utilities, create a backup copy of the
software diskette(s).
Create a directory on the host computer's hard drive where the PC Utilities
will reside (e.g., c:\nstor\pc_utils\).
Copy the contents of the AdminiStor PC Utilities diskette into the directory
you created.
Change directories to the directory created.
Review the Readme.txt file for any information that may not be included in
this manual.
From a DOS command line or DOS window, type:
<Enter>.
The install program will extract the program files and translate the Drive Size
File if present.
Your SCSI adapter's ASPI drivers must be installed prior to running
AdminiStor PC Utilities – Raidfx.exe.
Change directories to the AdminiStor PC Utilities installation directory.
From the DOS command line, type:
When using the DOS-based utility, the SCSI ID of the Ultra S2S RAID
Controller must be set within IDs 0 - 6. This enables the software to
recognize the controller. To change the SCSI IDs refer to "SCSI ID Menu"
in the CR8e User's Guide, "Using the CR8e" chapter.
install
and press <Enter>.
raidfx
and press