Table of Contents
Advertisement
Administering the Array
Manual Configuration
1
2
84
Manual Configuration
This section describes how to manually change a configuration.
To change a configuration, use the arrow keys to highlight View/Update and
press <Enter>.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
Choose this option to view, modify, and add additional System Drive(s) to an
existing configuration.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Select Define Packs from the Configuration menu.
Packs can include disks on different channels. The number of drives in a
pack determines the allowable RAID levels for all of the system drives
created in that pack.
To use more than eight drives in a system drive, create two to four packs that
are identical in number and size of disks. Then when you go to "Define
System Drives", use this group of packs to create a spanned system drive.
If you want identical packs, but do not want spanned system drives, define
the packs one at a time, creating a system drive out of each pack before
defining the next pack.
AdminiStor PC Utilities
2 Channel - 16 Targ, 16MB SX DAC960SX at p1 0000 c0
<F1>= help
Item Help
Choose this option to create or cancel one or more packs and also to view
information on the physical drives.
Use Cursor keys for selection, <Enter> to select, <Esc> to Previous Menu
Configuration Menu
Automatic
New
View/Update
Increase Capacity
Advanced Functions
Backup
Restore
Print
Clear
New Configuration
Define Packs
Define System Drives
Version 7.11
Firmware: t6, v3.33-00
Version 7.11
Firmware: t6, v3.33-00
Advertisement
Table of Contents
