The main fuse (C, fig. 169), is positioned in front of the rear
fuse box, on the solenoid starter (D). Remove the fuse cap
(E) to reach it.
A blown fuse is identified by the interrupted centre link (F,
fig. 170).
Important
To prevent short circuits, replace the fuse after the
Key-Off.
Warning
Never use a fuse with a rating other than specified.
Failure to observe this rule may damage the electric system
or even cause fire.
E
C
F
IN GOOD
D
fig. 169
F
BLOWN
fig. 170
179
E