ABS disabling function
E
This function disables the ABS control unit.
To display the function, enter the "Setting" menu page 46
and access the "ABS" page.
After accessing the display, press the reset button (14, fig. 4)
for 3 seconds to disable ABS.
The instrument panel will send the disabling request
("WAIT...." will appear on the circular display (B, fig. 6) for 6
seconds) and then if ABS is actually disabled, "DISABLED"
will appear on the circular display (B, fig. 6).
The ABS light (10, fig. 3) signals the disabling, switching from
an "off" status to "flashing".
To reenable the ABS system, turn the motorcycle off and on
(Key-Off/Key-On).
Note
If the disabling request was not successful, the
instrument panel will display "NOT DISABLED" in the
circular display (B, fig. 6).
In this case, repeat the procedure. If the problem persists,
contact your Ducati dealer or Authorised Service Centre.
48
fig. 40