Checking Brake Pads For Wear - Ducati Multistrada 1200 ABS Owner's Manual

Checking brake pads for wear

To facilitate inspection without removing the pads from the
callipers, brake pads have a wear mark. If the grooves in the
pad friction material are still visible, the pad is still in good
condition.
The pads must be replaced when approx. 1 mm of friction
material (fig. 142 and fig. 143) can be seen through the
opening between the callipers.
Important
Have the brake pads replaced at a Ducati Dealer or
authorised Service Centre.
MIN
1 mm
E
fig. 142
fig. 143
147