Instrument panel backlighting adjustment
E
function
This function adjusts the instrument panel backlighting
intensity.
To display the function, enter the "setting" menu page 46
and access the "B. LIGHT" page.
The information will be displayed as follows:
- the arrows indicate the adjustment currently in use;
- use buttons (1, fig. 7) "▲" and (2, fig. 7) "▼" to select
the new adjustment;
- to store the new adjustment press the reset button (14,
fig. 4); the arrows will move to the new stored condition.
To exit, select "EXIT" and press the reset button (14, fig. 4).
"MAX" adjustment: storing this condition, the backlighting is
at maximum brightness;
"MID" adjustment: storing this condition, the backlighting is
reduced approximately 30% relative to maximum
brightness;
"MIN" adjustment: storing this condition, the backlighting is
reduced approximately 70% relative to maximum
brightness;
70
Note
In the event of an interruption of the power supply
from the battery, when power is restored at the next Key-On,
the backlighting will always be set by default to maximum
brightness.