Load" Function (Setup Change) - Ducati Multistrada 1200 ABS Owner's Manual

"LOAD" FUNCTION (setup change)

E
This function, which is only available in the "S" version,
changes the vehicle setup.
Each individual riding style is associated with four different
setups (fig. 28).
To change the vehicle setup, press the reset button (14, fig.
4) for 3 seconds consecutively and the "LOAD" menu will
appear on the circular display (B, fig. 6).
The desired setup can be selected by pressing the same
reset button multiple times (14, fig. 4). To confirm the setup,
press the same reset button again for 3 seconds (14, fig. 4).
At the end of the 3 seconds, the change occurs immediately
and the instrument panel exits the display mode
automatically.
Example: if a setup change is made from "individual
passenger" to "passenger with luggage", the change may
vary depending on the set riding style (the "passenger with
luggage" setup may have different adjustments depending
on if the riding style that is set to SPORT, TOURING, URBAN
or ENDURO).
If the "LOAD" menu is activated and the rest button is not
pressed (14, fig. 4) for 10 consecutive seconds, the
instrument panel will automatically exit the display mode
without making any change.
44
Warning
The setup change can lead to a different motorcycle
riding style; it is recommended to be careful if changing the
setup while riding (it is recommended to change the setup at
a low speed).