Adjusting the rear shock absorber
E
The rear shock absorber has external commands that enable
you to adjust the setting to suit the load on the motorcycle.
The adjuster (1, fig. 115) located on the lower connection
holding the shock absorber to the swingarm adjusts the
damping during the rebound phase (return).
The knob (2, fig. 115), located on the left side of the
motorcycle, adjusts the preload of the shock absorber
external spring.
The adjuster (3, fig. 116) located on the expansion reservoir
of the shock absorber adjusts the damping during the
compression phase.
126
2
MTS1200 ABS
3
MTS1200 ABS
1
fig. 115
3
fig. 116