Download  Print this page

Ducati Multistrada 1200 ABS Owner's Manual Page 63

Hide thumbs

Advertisement

"FRONT" adjustment
E
- the top of the circular display (B, fig. 6) will show the set
compression [C.] and rebound [R.];
- use buttons (1, fig. 7) "▲" and (2, fig. 7) "▼" to select
the parameter to change and press the reset button (14,
fig. 4);
- the number to change appears on the circular display (B);
- buttons (1, fig. 7) "▲" and (2, fig. 7) "▼" can increase or
decrease the number (between 1 and 32);
- press the reset button (14, fig. 4) to confirm the new
level.
Note
Increasing the set value "decreases" the hydraulic
"braking"; decreasing the value "increases" the hydraulic
"braking" of the shock absorber.
At this point, store the new setting by pressing the reset
button (14, fig. 4) for 3 seconds with "MEMORY" displayed.
The upper indication [C.] or [R.] will be updated to confirm
that the new setting was "received" and stored.
To exit the function, select "EXIT" and press the reset button
(14, fig. 4).
62

Advertisement

Table of Contents

This manual is also suitable for:

Multistrada 1200s abs

Comments to this Manuals

Symbols: 0
Latest comments:
  • Shaun Jan 07, 2017 06:19:
    Very useful, thank you. Dont have to take the paper version out in the garage and get it covered in oil, grease etc.