Unscrew the four screws (3, fig. 154) that fasten the panel
(4) to top fairing.
E
Remove the panel (4), lifting the rear part to unhook the tabs
from the slots (A, fig. 155) in the top fairing. Detach the
connector (5) from the bulb holder (6). Turn the bulb holder
with the burnt-out bulb anticlockwise and remove it. Replace
the bulb with an identical one.
Note
Be careful to hold the new bulb at the base only. Never
touch the transparent body with your fingers or it will blacken
resulting in reduced bulb brilliancy.
154
4
3
fig. 154
5
A
3
6
A
6
fig. 155
3
4