3/4" Custom Panel Dimensions - Monogram ZKST300N Design Manual With Installation Instructions

30" built-in bottom-freezer, 2-drawer refrigerator
Table of Contents

Advertisement

Available languages

Available languages

Design Guide
3/4" CUSTOM PANEL DIMENSIONS: 80" High Fully Integrated Installation
If you choose to install custom panels, they must be cut to
NOTE:
This product is designed to handle 34" panels that
the dirnensions shown. The panels will attach to the door
are made of wood.
and drawers using a hook and bracket system.
33-3/8" x 23" is the maximum opening for a glass
EXTREMELY IMPORTANT: Custom wood panels must be at
window. The opening may be smaller if desired.
least 3/4" thick where hooks and bracket hardware are
attached. Refer to Templates for hook and bracket location.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 Ibs.
PANELS FOR SOLID DOOR AND DRAWERS
PANELS
FOR GLASS
DOOR
B Freezer Drawer Panel: 9 Ibs.
283/40"
-— 29-3/4" >|
€ Convertibe Drawer Panel: 19 Ibs.
3/8"
45-3/8"
45-3/8
33-3/8"
a
A
ret [8
*Styles
must be a min 3-3/8" t
r aluminum
+
3-3/8" +] eH
| b~ 3.3/8"
yles
must be a
m i
0 cover aluminu
c
Co
|e
93"
+
door frame.
Design Tip: Some amount of each panel will be visible on the interior side
\
|
4
22-3/4"
-C)-
=
of the unit. It is recommended that both sides of each panel be finished.
Cy
Design Tip: If using custom panels, a cutom toe kick should be considered.
'
t
+
The Bottom of case is white.
3/4" CUSTOM PANEL DIMENSIONS: 84" High Fully Integrated Installation
If you choose to install custorn panels, they must be cutto
| NOTE: this product is designed to handle 34" panels that
the dimensions shown. The panels will attach to the door
are made of wood.
and drawers using a hook and bracket system.
33-3/8" x 23" is the maximum opening for a glass
EXTREMELY IMPORTANT: Custom wood panels must be at least
window. The opening may be smaller if desired.
3/4" thick where hooks and bracket hardware are attached.
Refer to Templates for hook and bracket location.
PANELS FOR SOLID DOOR AND DRAWERS
PANELS FOR GLASS BOOR
IMPORTANT NOTE: Maximum panel weight:
|.
29-3/4"
+l
A Fresh Food Door Panel: 33 Ibs.
7
+ 29-314 —|
B Freezer Drawer Panel : 9 Ibs.
€ Convertible Drawer Panel: 19 Ibs.
49-378
49-3/8"
33-3/8"
}«——
73" ——_»}
:
*
:
"
7/2" 4
le
Styles must be a min 3-3/8" to cover
a
33/8]
be
a kage"
aluminum door frame.
N
22-374"
c
cy.
Design Tip: Some amount of each panel will be visible on the interior side of
the unit. It is recommended that both sides of each panel be finished.
Design Tip: If using custom panels, a cutom toe kick should be considered. The
Bottom of case is white.
11

Advertisement

Table of Contents
loading

Table of Contents