Installing The Starter Clutch - Yamaha 2008 Fazer FZ1-N Service Manual

b. When turning the starter clutch drive gear
counterclockwise "A", the starter clutch and
the starter clutch drive gear should engage,
otherwise the starter clutch is faulty and
must be replaced.
c. When turning the starter clutch drive gear
clockwise "B", it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS24600

INSTALLING THE STARTER CLUTCH

1. Install:
• Generator rotor "1"
• Damper "2"
• Driven gear "3"
NOTE:
• The hole side of the damper is installed to
the generator side.
• Lubricate the engine oil "4".
2. Install
• Starter clutch drive gear "1"
• Collar "2"
• Washer "3"
Refer to "CHECKING THE STARTER
CLUTCH" on page 5-35.
3. Install:
• Washer "1"
• O-ring "2"
• Spacer "3"
NOTE:
Lubricate the engine oil to O-ring.
5-36
STARTER CLUTCH
New