Yamaha 2008 Fazer FZ1-N Service Manual page 373

8. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-135.
OK↓
9. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-135.
OK↓
10.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-135.
OK↓
11.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 8-135.
OK↓
12.Check the starting circuit cut-off
relay.
Refer to "CHECKING THE
RELAYS" on page 8-142.
OK↓
13.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-149.
OK↓
14.Check the entire ignition system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK↓
Replace the ECU
NG→
Replace the right handlebar switch.
NG→
Replace the neutral switch.
NG→
Replace the sidestand switch.
NG→
Replace the clutch switch.
NG→
Replace the relay unit.
NG→
Replace the lean angle sensor.
NG→
Properly connect or repair the ignition
system's wiring
8-4
IGNITION SYSTEM