Yamaha 2008 Fazer FZ1-N Service Manual page 472

EAS27770
[D-1] MAINTENANCE OF THE ABS ECU
Removing the ABS ECU
1. Remove:
• ABS ECU "1"
NOTE:
When removing the ABS ECU, take care not to
damage the ABS ECU or ABS ECU couplers.
A. FZ1-SA
B. FZ1-NA
2. Remove:
• ABS ECU coupler "1"
• ABS ECU coupler "2"
NOTE:
• Do not pull the ABS ECU leads to remove
the ABS ECU couplers.
• Always press on the locks "3" to disconnect
the ABS ECU couplers from the ABS ECU.
ABS (ANTI-LOCK BRAKE SYSTEM)
A. FZ1-SA
B. FZ1-NA
Checking the ABS ECU
1. Check:
• Terminals "1" of the ABS ECU
Cracks/damages → Replace ABS ECU
• Terminals "2" of the ABS ECU coupler
Connection defective, contaminated,
come-off → Correct or clean.
NOTE:
If the ABS ECU couplers are clogged with mud
or dirt, clean with compressed air.
8-103