Checking The Drive Sprocket; Checking The Rear Wheel Sprocket; Checking The Rear Wheel Drive Hub; Installing The Drive Chain - Yamaha 2008 Fazer FZ1-N Service Manual

▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4. Check:
• O-rings "1"
Damage → Replace the drive chain.
• Drive chain rollers "2"
Damage/wear → Replace the drive
chain.
• Drive chain side plates "3"
Damage/wear → Replace the drive
chain.
Cracks → Replace the drive chain and
make sure the battery breather hose is
properly routed away from the drive chain
and below the swingarm.
5. Lubricate:
• Drive chain
Recommended lubricant
Engine oil or chain lubricant
suitable for O-ring chains
EAS23460

CHECKING THE DRIVE SPROCKET

1. Check:
• Drive sprocket
More than 1/4 tooth "a" wear → Replace
the drive chain sprockets as a set.
Bent teeth → Replace the drive chain
sprockets as a set.
b. Correct
1. Drive chain roller
2. Drive chain sprocket
EAS23470

CHECKING THE REAR WHEEL SPROCKET

Refer to "CHECKING AND REPLACING THE
REAR WHEEL SPROCKET" on page 4-22.
EAS23480

CHECKING THE REAR WHEEL DRIVE HUB

Refer to "CHECKING THE REAR WHEEL
DRIVE HUB" on page 4-21.
EAS28800

INSTALLING THE DRIVE CHAIN

1. Lubricate:
• Drive chain
Recommended lubricant
Engine oil or chain lubricant
suitable for O-ring chains
2. Install:
• Drive sprocket
• Lock washer
• Drive sprocket nut
Refer to "ENGINE REMOVAL" on page 5-
1.
Drive sprocket nut
85 Nm (8.5 m·kg, 61 ft·lb)
4-83
CHAIN DRIVE
New