Installing The Swingarm - Yamaha 2008 Fazer FZ1-N Service Manual

5. Check:
• Connecting arms "1"
• Relay arm "2"
Damage/wear → Replace.
6. Check:
• Bearings "3"
• Oil seals "4"
Damage/pitting → Replace.
7. Check:
• Collars "5"
Damage/scratches → Replace.
EAS23380

INSTALLING THE SWINGARM

1. Lubricate:
• Bearings
• Spacers
• Dust covers
• Pivot shaft
Recommended lubricant
Lithium-soap-based grease
2. Install:
• Swingarm
• Pivot shaft "1"
• Pivot shaft nut "2"
3. Install:
• Rear shock absorber assembly
• Rear wheel
Refer to "INSTALLING THE REAR
SHOCK ABSORBER ASSEMBLY" on
page 4-77 and "INSTALLING THE REAR
WHEEL" on page 4-24.
4. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE
CHAIN SLACK" on page 3-27.
Drive chain slack
25.0–35.0 mm (0.98–1.38 in)
4-80
SWINGARM