Installing The Starter Clutch; Installing The Generator - Yamaha XVS950CU 2014 Service Manual

▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Install the starter clutch gear "1" onto the gen-
erator rotor "2" and hold the generator rotor.
b. When turning the starter clutch gear clock-
wise "A", the starter clutch and the starter
clutch gear should engage, otherwise the
starter clutch is faulty and must be replaced.
c. When turning the starter clutch gear counter-
clockwise "B", it should turn freely, otherwise
the starter clutch is faulty and must be re-
placed.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS24600

INSTALLING THE STARTER CLUTCH

1. Install:
• Starter clutch
• Starter clutch bolts "1"
Starter clutch bolt
24 Nm (2.4 m·kgf, 17 ft·lbf)
LOCTITE®
TIP
While holding the generator rotor "2" with the
sheave holder "3", tighten the starter clutch
bolts.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
2 1
1
GENERATOR AND STARTER CLUTCH
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
3
▼▼▼
EAS24500

INSTALLING THE GENERATOR

1. Install:
• Generator rotor
• Washer
• Generator rotor bolt
TIP
• Clean the tapered portion of the crankshaft and
the generator rotor hub.
• When installing the generator rotor, make sure
the woodruff key is properly seated in the key-
way of the crankshaft.
• Lubricate the generator rotor bolt threads and
washer mating surfaces with engine oil.
2. Tighten:
• Generator rotor bolt "1"
TIP
▲▲▲
While holding the generator rotor "2" with the
sheave holder "3", tighten the generator rotor
bolt.
3. Apply:
• Sealant
(onto the crankshaft position sensor lead
grommet)
5-46
Generator rotor bolt
90 Nm (9.0 m·kgf, 65 ft·lbf)
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215®)