• If the pulsating action is hardly felt in
either the brake lever or brake pedal,
check that the brake hoses are connected
correctly to the hydraulic unit.
12. Set the main switch to "OFF".
13. Remove the test coupler adaptor from the
test coupler.
14. Set the main switch to "ON".
15. Set the engine stop switch to "
EAS22820
[D-6-5] TRIAL RUN
After all checks and services are completed,
always ensure the scooter has no problems by
performing the trial running at a speed of faster
than 10 km/h.
ABS (ANTI-LOCK BRAKE SYSTEM)
".
4-57