Installing The Oil/Water Pump Assembly - Yamaha 2008 Fazer FZ1-N Service Manual

NOTE:
When installing the inner rotor, align the pin "1"
in the oil pump shaft with the groove in the
inner rotor "2".
3. Install:
• Oil/water pump driven sprocket "1"
Oil/water pump driven sprocket
bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
LOCTITE®
NOTE:
5VY mark of the oil/water pump driven gear is
installed at oil pump side.
4. Check:
• Oil pump operation
Refer to "CHECKING THE OIL PUMP" on
page 5-58.
EAS25030
INSTALLING THE OIL/WATER PUMP
ASSEMBLY
1. Install:
• Oil ring
New
• Oil/water pump assembly "1"
• Dowel pin
• Bolts "2"
Oil/water pump assembly bolt
12 Nm (1.2 m·kg, 8.7 ft·lb)
LOCTITE®
2. Install:
• Washer
• Oil/water pump assembly drive chain "1"
• Oil/water pump assembly drive sprocket
"2"
• Collar
NOTE:
Install the oil/water pump assembly drive chain
"1" onto the oil/water pump assembly drive
sprocket "2".
ECA5D01016
CAUTION:
After installing the oil/water pump assem-
bly drive chain and drive sprocket, make
sure the oil/water pump turns smoothly.
3. Install:
• Oil/water pump assembly drive chain
guide "1"
Oil/water pump assembly drive
chain guide bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
LOCTITE®
NOTE:
"UP" mark of the oil/water pump assembly
drive chain guide is upward.
5-60
OIL PUMP