Yamaha 2008 Fazer FZ1-N Service Manual page 479

A. FZ1-SA
1. Indicate the malfunction code (Example: malfunction code 11)
2. ABS warning light flashes every 0.5 second for more than 6 seconds. → [C-4, C-5]
If the ABS warning light flashes every 0.5 second, the malfunction code of a past malfunction
has not been stored in the memory of the ECU (ABS). If a malfunction code is displayed on the
multifunction display, the ABS warning light flashes. Make sure that the customer understands
the possible conditions when the ABS warning light comes on.
EAS27870
[B-5] MALFUNCTION CHECK BY THE ABS SELF DIAGNOSIS (PRESENT MALFUNCTION)
NOTE:
Before proceeding to read the part of "Arrangement and the function of test coupler".
Remove the side cowling (left) and check the location of test coupler. Connect the test coupler
adapter with the test coupler in order to ground the T/C terminal (sky-blue). (Figure-"A")
Set the range of pocket tester to DC 20 V. Connect the negative (-) terminal of tester to the T/F ter-
minal (light green) and positive (+) terminal to the positive (+) terminal of battery. (Figure-"B") Read
the tester indication. (Figure-"C")
NOTE:
Read the code through this means so that the "currently malfunction" code is not indicated on the
meter.
ABS (ANTI-LOCK BRAKE SYSTEM)
B. FZ1-NA
8-110