Yamaha 2008 Fazer FZ1-N Service Manual page 179

4. Lower the front wheel so that it is on the
ground.
5. Tighten:
• Wheel axle
Wheel axle nut
72 Nm (7.2 m·kg, 52 ft·lb)
• Wheel axle pinch bolt
Wheel axle pinch bolt
23 Nm (2.3 m·kg, 17 ft·lb)
ECA14140
CAUTION:
Before tightening the front wheel axle, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
6. Install:
• Brake caliper
Brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
EWA13490
WARNING
Make sure the brake cable is routed prop-
erly.
NOTE:
Make sure that there is enough space between
the brake pads before installing the brake cali-
pers onto the brake discs.
4-16
FRONT WHEEL