Nomadix Access Gateway User Manual page 249

A G
CCESS ATEWAY
1. From the Web Management Interface, click on
The Add Static Port-Mapping Entries screen appears:
Enter the
2. Internal IP Address
Ensure that the device with the Internal IP Address has been added to the
subscriber's table.
Enter the
3. Internal Port
Enter a valid
4.
Enter the
5. External IP Address
The External IP address field will default to the IP address of the Access
Gateway.
Enter the
6. External Port
Optional: Enter the
7.
connect to the internal device from any network-side workstation.
8. Optional: Enable the
this will only allow address in the source-based access control list to connect on this port
mapping. Source-based access control needs to be enabled for this to be in effect.
Optional: Enter the
9.
connect to the device from any TCP/UDP port of a network-side workstation.
System Administration
.
reference.
.
MAC Address
.
reference.
Remote IP Address
Protect with Source IP-based Access Control
Remote Port
System
. Leave this field set to zero if you want to
reference. Leave this field set to zero if you want to
, then Static Port-Mapping Add.
option. Enabling
237