Powering Up The System - Nomadix Access Gateway User Manual

Powering Up the System

Use this procedure to establish a direct cable connection between the Access Gateway and your
laptop computer, and to power up the system.
Place the Access Gateway on a flat and stable work surface.
1.
2. Connect the power cord.
Connect the DB9 serial cable between the Access Gateway's "serial port" or "front Access
3.
RJ45 port" and your computer.
Turn on your computer and allow it to boot up.
4.
5. Turn on the Access Gateway.
28
A
CCESS
Connect the serial
cable here
(On other platforms,
connection may be via
front-access RJ45 port).
Installing the Access Gateway
G
ATEWAY