Nomadix Access Gateway User Manual page 74

Enable or disable the
2.
must provide a valid
For more information about setting up SSL, go to
SSL support allows for the creation of an end-to-end encrypted link between the Access
Gateway and its clients by enabling the Internal Web Server (IWS) to display pages under
a secure link—important when transmitting AAA information in a network.
Adding SSL support to the Access Gateway requires service providers to obtain digital
certificates from VeriSign™ to create HTTPS pages. Instructions for obtaining certificates
are provided by Nomadix.
To enable SSL Support, your Access Gateway's flash must include the server.pem,
cakey.pem, and cacert.pem certificate files (the "cacert.pem" file is provided
with your Access Gateway). For assistance, contact
Support.
You must reboot the Access Gateway every time you enable or disable SSL
Support.
3. If you want to designate a portal page, you must enable the
leave this feature disabled.
The Portal Page IP or DNS address are added to the IP passthrough list
automatically.
If you enabled the Portal Page feature, provide the following supporting information:
4.
Portal Page URL

Parameter Passing (enabled or disabled)

Parameter Signing (including Method, Parameters, and Shared Secret)

See
signing.
Portal XML POST URL

Portal XML Post Port

62
SSL Support
Certificate DNS Name
Redirection Parameter Signing
feature, as required. If you enable SSL Support, you
.
Setting Up the SSL
for more information about parameter
A
CCESS
Feature.
Appendix A: Technical
Portal Page feature, otherwise
System Administration
G
ATEWAY