Nomadix Access Gateway User Manual page 140

Adding an Upstream RADIUS NAS
If you want to add a new Upstream RADIUS NAS (for example, an 802.11 Access Point
1.
on the subscriber side of the Access Gateway), click on the
Upstream RADIUS NAS screen appears:
2. To make this entry the "active" NAS entry, click on the
3. Enter an IP Address
Enter a secret key in the
4.
process, the server and client exchange secret keys. The secret keys must match for
communication between the server and the client to continue. The secret key is a valuable
and necessary security measure.
5. Enter a secret key in the
6. Select the Default RADIUS Service Profile
RADIUS requests originating from this Upstream NAS will be routed via the
specified profile if it cannot be routed based on realm. Leave this field blank if
default routing is not desired.
128
for the Upstream NAS.
Authentication Secret Key
Accounting Secret Key
Add
Entry Active
field. During the authentication
field.
from the pull-down menu (see note).
A G
CCESS ATEWAY
button. The Add
check box.
System Administration