Enabling Dnssec Support - Nomadix Access Gateway User Manual

If required, make this an
14.
appropriate boxes.
Do not allow pools to overlap.
Optional, if the gateway router for the DHCP Pool is other than that of the DHCP Server
15.
IP, select
Specify
When finished establishing your DHCP Pools, click on the
16.
Configuration Page
17. You must now reboot the system for the new settings to take effect. Click the check box for
Reboot after changes are saved?
and reboot the system, or click on the
their previous state.
The existing lease pool and lease table are deleted and the Access Gateway reboots. The
Access Gateway can issue IP addresses to any DHCP enabled subscriber who enters the
network.

Enabling DNSSEC Support

DNSSEC support adds authentication and integrity capability to DNS systems. The DNSSEC
feature in the NSE allows DNSSEC queries and responses to traverse the NSE between
subscribers and the NSE's configured DNS servers. The NSE itself does not participate in
DNSSEC trust relationships with subscribers. Reboot is not required.
Use the following procedure to set the DNS configuration options.
From the Web Management Interface, click on
1.
Name System (DNS) Settings screen appears:
86
IP Upsell Pool
and enter the IP address of the gateway router of choice.
to return to the previous page.
then click on the
and/or the
Default Pool
Submit
button if you want to reset all the values to
Reset
Configuration
A
CCESS
by checking the
Back to Main DHCP
button to save your changes
, then . The Domain
DNS
System Administration
G
ATEWAY