If you enabled the Credit Card Service, define which service you require (
9.
or
Chainfusion
DNS must be configured if you want to enter meaningful URLs instead of numeric
IP addresses into any of the Access Gateway's configuration screens (for
example, the Credit Card Server URL in the following step).
If the Credit Card Service is enabled, enter the information for the following fields:
10.
Credit Card Server URL
Credit Card Server IP
Merchant ID
Authorize.net or Chainfusion).
Check the
11.
Use NSE's Hostname and DNS domain name
and domain name to be sent to the Credit Card server instead of the local NSE IP address.
12.
Enable or disable the
can change the transaction key at your discretion. To change the transaction key, simply
enter the key in the
Transaction Key
The SIM Compliant option refers to Authorize.net's Simple Integration Method.
Enable or disable
13.
You can assign a session idle timeout parameter for subscribers (see following note). To
14.
assign an idle timeout, simply enter a numeric value (in seconds) in the
box (the default is 1200).
Timeout
Subscriber Idle Timeout does not apply to RADIUS and Post Pay PMS
subscribers.
If you enabled or disabled
15.
Reboot after changes are saved?
SSL Support feature is enabled or disabled).
Click on the
16.
to reset all the values to their previous state.
Enabling AAA Services with an External Web Server
You are here because you want to enable the AAA Services with an External Web Server
(EWS). In the EWS mode, the Access Gateway redirects the subscriber's login request to an
external server.
64
) from the pull-down menu.
(a valid ID issued by the credit card reconciliation service provider –
SIM Compliant
Change Transaction Key
box.
Smart Client Support
SSL Support
button to save your changes, or click on the
Submit
feature, as required. With this feature enabled, you
box, then re-enter the key in the
, as required.
on this screen, you must click the check box for
(the Access Gateway must be rebooted every time the
A
CCESS
Authorize.net
box if you want the Hostname
Subscriber Idle
button if you want
Reset
System Administration
G
ATEWAY
Verify
Need help?
Do you have a question about the Access Gateway and is the answer not in the manual?
Questions and answers