Group Bandwidth Limit Policy - Nomadix Access Gateway User Manual

From the Web Management Interface, click on
1.
Management.
If required, click the check box for
2.
available on the AG2300 platform because Bandwidth Management is always enabled).
If you enabled Bandwidth Management, enter the uplink and downlink speeds (in Kbps) in
3.
the appropriate fields.
Setting the uplink or downlink speeds to anything greater than what your product
supports is prevented by the NSE. Please refer to
page 266
If you made any changes to the settings on this screen, you must click the check box for
4.
Reboot after changes are saved?
Click on the
5.
Reset button if you want to reset all the values to their previous state.

Group Bandwidth Limit Policy

The Group Bandwidth Limit Policy allows the you to assign a common bandwidth rate limiting
policy to a group of subscriber devices. All devices within the group share the total bandwidth
allocated to the policy.
The Group Bandwidth Limit Policy feature defines the following vendor-specific attributes
(VSAs):
74
The Bandwidth Management screen appears:
for your product's capabilities.
button to save your changes and reboot the system, or click on the
Submit
Configuration
Bandwidth Management Enabled
(the Access Gateway must be rebooted).
A
CCESS
, then
Bandwidth
(this field is not
"Product Specifications" on
System Administration
G
ATEWAY