Nomadix Access Gateway User Manual page 107

A G
CCESS ATEWAY
Note that the files must exist on flash first.
In the
4. IKE Channel Security Parameters
Acceptable Encryption Algorithm

must check at least one option).
 Acceptable Hash Algorithm
check at least one option).
 Key Strength
(Group 2).
 Lifetime
supported.
5. Click Add
Tunnel Settings screen.
Click the
6. Back to Main IPSec Tunneling Settings page
Settings screen.
Modifying an Existing IPSec Tunnel Peer
Click on the IPSec tunnel peer link that you wish to modify in the
1.
table. The IPSec Tunnel Peer Settings screen opens.
Modify the settings as desired.
2.
Click:
3.
Modify

 Remove
 Reset
original settings.
Click the
4. Back to Main IPSec Tunneling Settings page
Settings screen.
Managing IPSec Security Policies
You can add a new IPSec security policy or modify the settings of an existing IPSec security
policy from the IPSec Tunnel Settings screen.
System Administration
(a.k.a. Diffie-Hellman) – Select either
– Enter the value (in seconds) in the
to add the IPSec tunnel peer to the
to save the changes to the peer.
to remove the peer from the
to undo any changes you made to the peer settings and return the peer to its
section, select the following settings:
s – Check the
DES
– Check the and/or
MD5
Lifetime
IPSec Tunnel Peers
IPSec Tunnel Peers
and/or checkboxes (you
3DES
checkboxes (you must
SHA
(Group 1) or
768-bit
field. Data life size is NOT
table on the IPSec
link to return to the IPSec Tunnel
IPSec Tunnel Peers
table.
link to return to the IPSec Tunnel
1024-bit
95