Nomadix Access Gateway User Manual page 129

A G
CCESS ATEWAY
These options enable an SNMP query to "ask" the access concentration device which
card, slot, or port the information is coming from. The information can then be "sent to"
and "billed by" the PMS. You must enter the
and
SNMP query
access concentrators connected to the site. You can also opt to Relogin after migration by
checking the "Relogin after migration"
For "cascading" Tut and RFC1493 compliant systems, click on the associated
button. The Cascading Support screen appears, allowing you to enter the IP address and
SNMP community for the primary and all "cascading" devices connected to the site. For
RFC1493 compliant systems, you have the additional option of defining the "Uplink
port."
From the Cascading Support screen, you can return to the main Port-Location Settings
screen at any time by pressing the
Click on the
6.
to reset all the values to their previous state.
See In Room Port
System Administration
duration (maximum time it takes to detect subscriber migration) of all
button to save your changes, or click on the
Submit
Mapping.
IP address
Enable box.
button.
Back
(not name),
SNMP community
Tut Systems
RFC1493 Systems
button if you want
Reset
,
Cascading
117