From the Web Management Interface, click on
1.
Rate Limiting screen appears:
2.
Click on the check box for
required.
Enter values for the following session "limiting" parameters:
3.
Mean Rate
Burst Size
Time Interval
Click on the
4.
For advanced security, see also
page
232.
Adding Static Ports {Static Port-Mapping Add}
Static Port-Mapping allows the network administrator to setup a port mapping scheme that
forwards packets received on a specific port to a particular static IP (typically private and mis-
configured) and port number on the subscriber side of the Access Gateway. The advantage for
the network administrator is that free private IP addresses can be used to manage devices (such
as Access Points) on the subscriber side of the Access Gateway without setting them up with
public IP addresses.
This procedure shows you how to add static ports.
236
Session Rate Limiting
(in seconds)
button to save your changes.
Submit
"Defining the MAC Filtering Options {Mac Filtering}" on
, then
System
Session Limit.
to enable (or disable) this feature, as
System Administration
A
G
CCESS
ATEWAY
The Session
Need help?
Do you have a question about the Access Gateway and is the answer not in the manual?