Nomadix Access Gateway User Manual page 83

A G
CCESS ATEWAY
1. From the Web Management Interface, click on
The Autoconfiguration Settings screen appears:
Enable or disable
2.
If you enabled Autoconfiguration, you must enter the following information into the
3.
corresponding fields:
RADIUS Authentication Name

RADIUS Password

Confirm Password

Click on the check box for
4.
you submit your changes.
Click on the
5.
data to its previous state.
See Enabling Auto
Enabling Auto Configuration
As shown in the diagram below, two subsequent events drive the automatic configuration of
Nomadix devices:
A flow of RADIUS Authentication Request and Reply messages between the Nomadix
1.
gateway and the centralized RADIUS server that specifies the location of the meta
System Administration
Autoconfiguration
Reboot after changes are saved?
button to save your changes, or click or the
Submit
Configuration.
Configuration
, as required.
, then Auto Configuration.
to reboot the system when
button to reset all
Reset
71