Nomadix Access Gateway User Manual page 162

From the Web Management Interface, click on
1.
Zone Migraton Settings screen appears:
Select
2. Relogin after migration
Add a new Zone
In the
Zone-Based Migration
the following parameter fields:
 Zone Name
name must be unique, cannot exceed 16 characters, and cannot contain characters that
are not alphanumeric, dash, underscore, or space.
Port-Locations

data must be entered as a string between 1 and 128 characters in length. The string
must contain either an individual numeric value ("211"), a comma-separated list of
numeric values ("211, 212"), a range of numeric values with dash-separated
delimiters ("211-899"), a list of ranges of numeric values ("211-300, 301-899"), or
a comma-separated list of individual numeric values and ranges ("211, 212, 213-
899").
Description

between 0 and 128 characters in length, and cannot contain characters that are not
alphanumeric, dash, underscore, or space.
In each of these fields, any leading or trailing spaces will be removed by the NSE when the
page is submitted.
150
to enable the Zone Migration feature.
section, new zones can be added and initially configured, using
– Allows entry of a name appropriate for the zone to be created. The
– This is where the port configuration for the zone is entered. The
– Allows entry of a description for the zone. This must be a string
, then
Configuration
System Administration
A G
CCESS ATEWAY
The
Zone Migration.