Nomadix Access Gateway User Manual page 189

A G
CCESS ATEWAY
12. Select a policy from the
page 120 for more information.
Enable
13. STMP Redirection
redirected by the global SMTP redirect configuration.
Click on the
Add
want to reset all the values to their previous state.
Adding a Group Type Profile
Several changes have been made to improve the NSE's handling of group account
administration.
Group accounts can now be configured with a maximum user value, which limits the

number of subscribers that can be logged in through the account at any given time.
Group accounts can now be added via XML using the GROUP_ADD command.

The overall layout and behavior of the WMI Subscriber Profile page has been

modified to better reflect the configuration status of different account types, and to
better support the Group Account changes:
The method of identifying an account as "group" has been modified. Instead of

simply selecting a checkbox on the Subscriber page, group accounts now
constitute a separate account "type" (along with Subscriber and Device). The
Group Account checkbox has been removed from the bottom of the page, and
replaced with a 'Group Account' button in the profile selection at the top.
A 'Maximum Users per Group' field has been added to allow setting the group

user limit.
System Administration
QoS Policy
to allow the specified user to have their SMTP traffic
button to add this device to the database, or click on the
menu. See "Setting up Quality of Service {QoS}" on
button if you
Reset
177