Defining The Radius Proxy Settings {Radius Proxy - Nomadix Access Gateway User Manual

If required, check the box for
12.
post session "goodbye" page). The "goodbye" page can be defined as a RADIUS VSA or
be driven by the Access Gateway's Internal Web Server (IWS).
If required, check the box
13.
to (and is added to the passthrough list) so they can run a page at their ISP to get their
password.
14. If required, check the box
be in the users profile and acted upon.
Changing the default tag number may result in a loss of connectivity.
Enable or disable the
15.
NSE is down.
16. Enable charging for idle time
packets.
17. Enable RADIUS QoS Policies
Click on the
18.
to reset all the values to their previous state.

Defining the RADIUS Proxy Settings {RADIUS Proxy}

A RADIUS Proxy allows the NSE to relay authentication and accounting packets between the
parties performing the authentication process. Different realms can be set up to directly channel
RADIUS messages to the various RADIUS servers.
For additional RADIUS information, see also:
"Setting up Quality of Service {QoS}" on page 120

"Defining the Realm-Based Routing Settings {Realm-Based Routing}" on page 130

"RADIUS Attributes" on page 281

126
Enable Goodbye URL
Enable Forget your Password
Enable RADIUS Based WAN VLAN
User Session Time Adjustment
to count idle time in the session time of Radius accounting
to assign a QoS policy to a user in their Radius Profile.
button to save your changes, or click on the
Submit
A
CCESS
(if you want the system to display a
to create a link that users can go
to allow the 802.1 q tag to
and credit functionality when the
button if you want
Reset
System Administration
G
ATEWAY