Adding Static Ports {Static Port-Mapping Add - Nomadix AG 5500 User Manual

AG 5500

Adding Static Ports {Static Port-Mapping Add}

Static Port-Mapping allows the network administrator to setup a port mapping scheme that
forwards packets received on a specific port to a particular static IP (typically private and mis-
configured) and port number on the subscriber side of the AG 5500. The advantage for the
network administrator is that free private IP addresses can be used to manage devices (such as
Access Points) on the subscriber side of the AG 5500 without setting them up with public IP
addresses.
This procedure shows you how to add static ports.
From the Web Management Interface, click on
1.
The Add Static Port-Mapping Entries screen appears:
Enter the
2. Internal IP Address
Ensure that the device with the Internal IP Address has been added to the
subscriber's table.
System Administration
System
.
, then
Static Port-Mapping Add.
241